To ensure someone is in front of the computer during the course, the candidate must click the arrow to proceed with the class each time a section is completed. The course is narrated, so students must use a computer with speakers, plug-in headphones, or earphones to listen.
One of the primary benefits of taking a 10 Hour online OSHA construction training course is that you can log out of the online training course during your training session, log back in later, and resume training from where you left off, even from another computer or tablet. OSHA has a strict 6-month completion deadline for a 10 Hour online course, but many students complete a 10 Hour course in just a few days.
Overview of 10-Hour online OSHA Course:
Listed down below are the modules you will cover in OSHA 10-Hour online training:
Introduction
- Module 1: Introduction to OSHA
- Module 2: OSHA Focuses on Four Hazards
- Module 3: Personal protective equipment
- Module 4: Health Hazards in Construction
- Module 5: Cranes, cranes, winches, elevators, and conveyors
- Module 6: Stairs and Ladders
- Module 7: Contact potential customers
- Module 8: Exposure to Asbestos Exam
Additional Course Details:
The construction industry is fraught with hazards, making a construction supervisor's role critical in ensuring employees' safety and health. The Occupational Safety and Health Administration (OSHA) enforces regulations to protect workers from occupational injuries and illnesses in the United States. This manual is a comprehensive guide for Wisconsin-based construction supervisors to understand and adhere to OSHA standards, thus ensuring a safe work environment.
Overview of OSHA Regulations
- The Occupational Safety and Health Act of 1970 The Occupational Safety and Health Act of 1970 (OSH Act) was established to ensure employees' safe and healthy working conditions by setting and enforcing standards. OSHA, a federal agency under the Department of Labor, was created to enforce these regulations.
- State Plans OSHA allows states to develop and operate their own occupational safety and health programs, known as State Plans. These plans must be at least as effective as federal OSHA regulations. Wisconsin does not have an approved State Plan, so federal OSHA regulations apply to construction businesses in the state.
- General Duty Clause Section 5(a)(1) of the OSH Act, also known as the General Duty Clause, requires employers to provide a workplace free from recognized hazards that could cause death or serious physical harm to employees.
OSHA Standards for Construction
- General Safety and Health Provisions (29 CFR 1926.20 - 1926.32) These provisions cover general safety requirements, including maintaining a safe work environment, competent person designation, and employee training.
- Personal Protective Equipment (PPE) (29 CFR 1926.95 - 1926.107) This section outlines the requirements for providing and using appropriate PPE, such as hard hats, safety glasses, and hearing protection, to minimize the risk of injury.
- Scaffolding (29 CFR 1926.450 - 1926.454) Scaffolding standards cover the proper design, construction, and use of various types of scaffolds to prevent falls and injuries.
- Fall Protection (29 CFR 1926.500 - 1926.503) This section details fall protection systems, such as guardrail systems, safety nets, and personal fall arrest systems, to prevent falls from elevated surfaces.
- Excavations (29 CFR 1926.650 - 1926.652) These standards address the proper excavation procedures, including soil classification, protective systems, and access and egress.
- Cranes and Derricks (29 CFR 1926.1400 - 1926.1442) This section establishes requirements for the safe operation of cranes and derricks, including inspections, operator qualifications, and load handling.
- Additional Standards: Numerous other standards are related to specific construction tasks and equipment, such as electrical safety, welding and cutting, and concrete and masonry construction.
Compliance and Enforcement
- Recordkeeping and Reporting Construction supervisors must maintain records of work-related injuries and illnesses as specified in 29 CFR 1904. Additionally, supervisors must report fatalities and severe injuries to OSHA within specific timeframes.
- Inspections OSHA conducts inspections to ensure compliance with safety standards. Inspectors evaluate the work environment, equipment, and procedures to identify potential hazards and violations.
- Citations and Penalties If an OSHA inspector identifies violations, the construction supervisor may receive citations and penalties. Penalties vary depending on the severity and type of a breach, ranging from serious to willful or repeated violations. Employers have the right to contest citations and proposed penalties.
- OSHA Consultation Services OSHA provides free, confidential consulting services to help small businesses identify and correct potential hazards. These consultations, available in Wisconsin through the On-Site Consultation Program, are separate from enforcement activities and do not result in penalties or citations.
- Employee Rights and Whistleblower Protection Under the OSH Act, employees can report workplace hazards and participate in OSHA inspections without fear of retaliation. Employers are prohibited from taking adverse action against employees who exercise their rights under the Act.
- Training and Education.
- OSHA Outreach Training Program The OSHA Outreach Training Program offers 10-hour and 30-hour courses for construction workers and supervisors, respectively. These courses provide instruction on OSHA standards and workplace safety and health.
- Hazard Communication (29 CFR 1910.1200) Employers must train employees on the hazards associated with chemicals in the workplace and the appropriate protective measures and emergency procedures.
- Confined Spaces (29 CFR 1926.1207) Construction supervisors must ensure that employees who enter or work in confined spaces receive proper training on the hazards, necessary precautions, and rescue procedures.
- Competent Person, A competent person can identify existing and predictable hazards in the workplace and has the authority to take corrective measures. Construction supervisors must ensure that qualified persons are designated for specific tasks, such as scaffolding or excavation, as required by OSHA standards.
- Developing a Safety and Health Program.
- Hazard Identification and Assessment Construction supervisors should regularly conduct job hazard analyses to identify potential hazards and develop appropriate control measures to mitigate risks.
- Written Safety and Health Policies A comprehensive written safety and health program should be developed and implemented, addressing hazards specific to the construction industry and the worksite. This program should include policies on PPE, hazard communication, emergency response, and accident investigation.
- Training and Communication Effective communication and training are crucial to maintaining a safe work environment. Supervisors should provide ongoing training and updates on safety and health issues, ensuring all employees understand their roles and responsibilities.
- Monitoring and Evaluation Construction supervisors should regularly monitor the workplace for compliance with OSHA standards and evaluate the effectiveness of their safety and health program. This process should include regular inspections, incident investigations, and corrective actions when necessary.
Conclusion
Complying with OSHA regulations is essential for construction supervisors in Wisconsin to ensure the safety and well-being of their employees. By understanding and adhering to these standards, construction supervisors can minimize the risk of injuries and illnesses, improve productivity, and maintain a strong reputation within the industry. In addition, developing a robust safety and health program, staying informed about regulatory changes, and engaging in continuous improvement will contribute to a successful and safe construction business in Wisconsin.